Innokin iTaste MVP3 30 Watt (Blue)

5.00 out of 5 based on 1 customer rating
(1 customer review)

$79.99 $39.99

The iTaste MVP3.0 is the newest in the line of internationally bestselling Innokin iTaste MVP Vaporizers!

In stock

SKU: innokin-005-blue. Categories: , , , , .

Product Description

Innokin iTaste MVP 3.0 30 Watt

Features and Specs:

Dimensions: 4″ x 1-3/4″ x 7/8″

Battery Level Indicator:

  • The iTaste MVP3.0 e cgiarette battery has a tri-color LED on the top.
  • Green = Almost fully Charged. When the iTaste MVP3.0 is fully recharged the top
  • LED light will power off.
  • Yellow = Half Power.
  • Red = Low Power. Charge the MVP3.0.

Variable Voltage:

Voltage can be adjusted from 3.0 – 9.0 volts in .1 volt increments.

Variable Wattage:

Wattage can be adjusted from 6.0 – 30.0 Watts in .5 watts increments.

Low Voltage Warning:

The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste MVP3.0 Advanced Personal Vaporizer will automatically power off.

Short Circuit/Atomizer Protection:

Short Circuit/Atomizer Protection protects the iTaste MVP3.0 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

The iTaste MVP3.0 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.4 the Ohms bar will blink and the MVP3 will not power on.

‘Vape while charging’ Technology

The iTaste MVP3.0 is recharged with a Micro USB cable. When plugged into a power source the iTaste MVP3.0 can also be vaped and charged at the same time with Innokin Technology’s ‘Vape while you charge’ pass-through technology.

Remembers last Voltage or Wattage setting:

When the iTaste MVP3.0 is turned off it will remember the current voltage or wattage setting and it will retain the setting when the iTaste MVP3.0 is powered on.

Portable power source for electronic products:

To charge your portable electronic device with the iTaste MVP3.0 plug the built-in Micro USB cable into the electronic device and power on the MVP3.0. The included iTaste MVP3.0 starter kit charging cable can also be used. Plug the larger USB port into the MVP3.0 and the Micro-USB into the electronic device and power on the iTaste MVP3.0. You may only charge one electronic device at a time. Do not attempt to charge more than one device at the same time or you may damage the device.

High compatibility 510 connector:

The iTaste MVP3.0 510 threading is compatible all standard 510 clearomizers & atomizers including the iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30S and the Gladius-M.

Technical Specifications:

  • Operating Voltage: 3.0V-9 V
  • Operating Wattage: 6.0W-.30W
  • Built In 3800mAh Battery
  • Standby current: 100uA max
  • Maximum output Wattage: 30W
  • Maximum output Current:10A
  • Maximum output Voltage: 9V
  • Clearomizer Resistance: 0.4 Ohm (minimum)
  • Charging: Micro USB DC 5V/1A
  • OUTPUT port:DC 5V /1A

1 review for Innokin iTaste MVP3 30 Watt (Blue)

    5 out of 5


    Recently, I ordered the MVP 3.0 and Nautilus tank after my original MVP died a slow death. Dallas Vapor Supplies had my order at my door within two days. Great customer service, fast shipping, and some of the lowest prices I’ve seen online. I’ll definitely be purchasing from them again. – Yvonne C.

Add a review

Fear Itself Speech ?? ?? ?? click through the following web site | Advanced Trading ToolsLearn How to Trade opciones binarias demo click here now
Loan Canada go credit visit their website